Factory:
TEL:
+86-574-62578134,62578876
FAX:
+86-574-62576717
International Office:
TEL:
+86-574-62837600,62708796
FAX:
+86-574-62837601 |
|
|
 |
|
| 100%Expanded Pure PTFE Packing |
| SUNPASSTMSTYLE 600EXP |
100%Expanded Pure PTFE Packing |
| Food Grade Packing |
| STYLE 6000EXP is made of 100% white expanded PTFE yarn. It contains no impregnant, has no lubricant, and has no finish treatment. STYLE 6000EXP is designed for use in valves, but can be used in other low speed services. Fast and simple to install, with minimum maintenance requirements. STYLE 6000EXP can be adjusted very finely and reduced to extremely low levels. High chemical resistance, very low coefficients of friction. STYLE 6000EXP is suitable for valves and pumps used in food processing, pharmaceuticals, paper mills, fiber plant, where high purity and corrosion resistance is required. | |
| Application Areas: |
| STYLE 6000EXP can be used in centrifugal and rotary shafts, reciprocating applications, and valve stems, sliders, mixers, vessels and pumps, power industry etc. |
| Application Media: |
| STYLE 6000EXP is suitable for pharmaceutical and food applications, potable water, solvents, oils, gases, effluents, oxygen etc. |
| Not Suitable For: |
| Molten alkali metals and fluorine compounds at high temperatures and pressures |
| Application Data: |
if STYLE 6000EXP does not outlast the valve it桯s in,well replacethe packing FREE.
No other Packing is similarly guaranteed.
| | |
|
|
Previous:
Kevlar Fiber Silicon Core Braided Packing
|
Next:
Kevlar Fiber Packing Lubricant With PTFE
|
Other Gland Packing Products:
 |
| PTFE PACKING |
STYLE 6500G isHigh-quality combination of PTFe with graphite incorporated yarn with corner of Kevar® fiber,to prevent gap extrusions within the high pressure and temperatrue range. STYLE 6600G is made from pure ...
 |
|
|
 |
| Pure PTFE With Kevlar Piber Corner Braided Packing |
| STYLE 6500PTFE is Pure PTFE yarn braided packing incorporated with pure 100% Dupont's Kevlar®yarn throughout the foure corners.This structure enhances the lubricating ability of Aranimd and reinforces the strength of the pure ...
|
|
|
 |
| Kevlar Fiber Silicon Core Braided Packing |
| STYLE 6700SC is combines a resilient silicone rubber core with the heat resistanted Dupont's Kevlar® fiber .The elastec rubber core gives the packing better menory,allowing it to withstand radial shaft motion and vibration while ...
|
|
|
 |
| 100%Expanded Pure PTFE Packing |
| STYLE 6000EXP is made of 100% white expanded PTFe yarn .it contains no impregnant,has no lubricant,and has no finish treatment. STYLE600EXP is designed for use in valves ...
|
|
|
 |
| Kevlar Fiber Packing Lubricant With PTFE |
| STYLE6500 Aramid fiber braided packing is made of DuPonts continuous filament Kevlar® yarn impregnated with PTFE emulsion and processed with lubricant.as the strength and module of Kevlar is as high as the steel-like ...
|
|
|
 |
| Pure PTFE Packing With Lubricant |
| STYLE 6000W is Interlock braided PTFE Yarn, long lubricant squeezed out under operating pressure soft. self-lubricant, applicable for dynamic seal at high liner speed.
|
|
|
 |
| Graphite And PTFE Packing |
| STYLE 6200GFO was made from graphite-PTFE compound without lubricant.Very good thermal conductivity.Hight flexibility and volumetric stability
|
|
|
|
|
