Factory:
TEL:
+86-574-62578134,62578876
FAX:
+86-574-62576717
International Office:
TEL:
+86-574-62837600,62708796
FAX:
+86-574-62837601 |
|
|
 |
|
| Pure PTFE With Kevlar Piber Corner Braided Packing |
| SUNPASSTMSTYLE 6500PTFE |
Pure PTFE With Keviar Piber Corner Braided Packing |
STYLE 6500PTFE is Pure PTFE yarn braided packing incorporated with pure 100% Dupont's Kevlar® yarn throughout the foure corners. This structure enhances the lubricating ability of Aramid and reinforces the strength of the pure PTFE packing. Good silding properties and thermal conductivity.
Every fiber is impregnated with PTFE emulsion. This system of impregnation assures even distribution of the PTFE. The fibers are saturated and sealed with PTFE particles, protecting the fibers from chemical action. To assure good break-in characteristics, a special high temperature synthetic lubricant is added. |
| Application Areas: |
| STYLE 6500PTFE can be used in piston pumps, kevlar, pulp, paper, waste water treatment, petrochemical, and other general industrial applications. |
| Application Media: |
| STYLE 6500PTFE is suitable for oils, solvents, diluted acids and alkalis. Abrasive media like sand, slurry, sewage, brine and etc. |
| Not Suitable For: |
| concentrated acids and lye, alkali metals, fluorine and fluorine compounds at high temperatures. |
|
|
|
Previous:
PTFE PACKING
|
Next:
Kevlar Fiber Packing Lubricant With PTFE
|
Other Gland Packing Products:
 |
| PTFE PACKING |
STYLE 6500G isHigh-quality combination of PTFe with graphite incorporated yarn with corner of Kevar® fiber,to prevent gap extrusions within the high pressure and temperatrue range. STYLE 6600G is made from pure ...
 |
|
|
 |
| Pure PTFE With Kevlar Piber Corner Braided Packing |
| STYLE 6500PTFE is Pure PTFE yarn braided packing incorporated with pure 100% Dupont's Kevlar®yarn throughout the foure corners.This structure enhances the lubricating ability of Aranimd and reinforces the strength of the pure ...
|
|
|
 |
| Kevlar Fiber Silicon Core Braided Packing |
| STYLE 6700SC is combines a resilient silicone rubber core with the heat resistanted Dupont's Kevlar® fiber .The elastec rubber core gives the packing better menory,allowing it to withstand radial shaft motion and vibration while ...
|
|
|
 |
| 100%Expanded Pure PTFE Packing |
| STYLE 6000EXP is made of 100% white expanded PTFe yarn .it contains no impregnant,has no lubricant,and has no finish treatment. STYLE600EXP is designed for use in valves ...
|
|
|
 |
| Kevlar Fiber Packing Lubricant With PTFE |
| STYLE6500 Aramid fiber braided packing is made of DuPonts continuous filament Kevlar® yarn impregnated with PTFE emulsion and processed with lubricant.as the strength and module of Kevlar is as high as the steel-like ...
|
|
|
 |
| Pure PTFE Packing With Lubricant |
| STYLE 6000W is Interlock braided PTFE Yarn, long lubricant squeezed out under operating pressure soft. self-lubricant, applicable for dynamic seal at high liner speed.
|
|
|
 |
| Graphite And PTFE Packing |
| STYLE 6200GFO was made from graphite-PTFE compound without lubricant.Very good thermal conductivity.Hight flexibility and volumetric stability
|
|
|
|
|
