Factory:
TEL:
+86-574-62578134,62578876
FAX:
+86-574-62576717
International Office:
TEL:
+86-574-62837600,62708796
FAX:
+86-574-62837601 |
|
|
 |
|
| Kevlar Fiber Packing Lubricant With PTFE |
| SUNPASSTMSTYLE 6500 |
Kevlar Fiber Packing Lubricant With PTFE |
| STYLE 6500 Aramid fiber braided packing is made of Du Ponts continuous filament Kevlar® yarn impregnated with PTFE emulsion and processed with lubricant. as the strength and module of Kevlar® is as high as the steel-like strength. So this packing compared with other kinds of braided packing. They can resist more serve media and higher pressure. It can be installed separately or as end rings with other kinds of packing to combine different characteristics into seals packing ring set. |
| Application Areas: |
| STYLE 6500 can be used in rotary pump, valves, piston pumps, mixers, reactors, pulp and paper, pharmaceutical, food, sugar, chemical and petrochemical, power stations, steel mills and many area. Also ideal as anti-extrusion rings in combination with softer packing. |
| Application Media: |
| STYLE 6500 is suitable for most chemicals, water, steam, oils, solvents, abrasive sand, slurry and other gritty media Not Suitable For: highly concentrated acids, caustic solutions, alkali metals, oxygen |
|
|
|
Previous:
100%Expanded Pure PTFE Packing
|
Next:
Pure PTFE Packing With Lubricant
|
Other Gland Packing Products:
 |
| PTFE PACKING |
STYLE 6500G isHigh-quality combination of PTFe with graphite incorporated yarn with corner of Kevar® fiber,to prevent gap extrusions within the high pressure and temperatrue range. STYLE 6600G is made from pure ...
 |
|
|
 |
| Pure PTFE With Kevlar Piber Corner Braided Packing |
| STYLE 6500PTFE is Pure PTFE yarn braided packing incorporated with pure 100% Dupont's Kevlar®yarn throughout the foure corners.This structure enhances the lubricating ability of Aranimd and reinforces the strength of the pure ...
|
|
|
 |
| Kevlar Fiber Silicon Core Braided Packing |
| STYLE 6700SC is combines a resilient silicone rubber core with the heat resistanted Dupont's Kevlar® fiber .The elastec rubber core gives the packing better menory,allowing it to withstand radial shaft motion and vibration while ...
|
|
|
 |
| 100%Expanded Pure PTFE Packing |
| STYLE 6000EXP is made of 100% white expanded PTFe yarn .it contains no impregnant,has no lubricant,and has no finish treatment. STYLE600EXP is designed for use in valves ...
|
|
|
 |
| Kevlar Fiber Packing Lubricant With PTFE |
| STYLE6500 Aramid fiber braided packing is made of DuPonts continuous filament Kevlar® yarn impregnated with PTFE emulsion and processed with lubricant.as the strength and module of Kevlar is as high as the steel-like ...
|
|
|
 |
| Pure PTFE Packing With Lubricant |
| STYLE 6000W is Interlock braided PTFE Yarn, long lubricant squeezed out under operating pressure soft. self-lubricant, applicable for dynamic seal at high liner speed.
|
|
|
 |
| Graphite And PTFE Packing |
| STYLE 6200GFO was made from graphite-PTFE compound without lubricant.Very good thermal conductivity.Hight flexibility and volumetric stability
|
|
|
|
|
